Technical Data; Units Of Measurement - Raider RD-GCS19 Manuel D'instructions

EN
Congratulations for the purchase of our RAIDER brand gasoline chain saw. As being properly installed and operated,
RAIDER are safe and reliable power tools, and their usage brings real pleasure. For your convenience an excellent service
network of 46 service stations has been built across the country.
Before operating the gasoline chain saw, please read carefully all instructions, recommendations and warnings and keep
them safe for further reference for all who will use the fan heater.
In case you decide to sell or submit this product to a new owner, please make sure the "Instructions' manual" is available with
it, so that new owner can get acquainted with the relevant safety measures and operating instructions.
Euromaster Import Export Ltd. is an authorized representative of the manufacturer and owner of the trademark RAIDER.
Address: Sofia City 1231, Bulgaria "Lomsko shausse" Blvd. 246, tel 02 934 33 33, 934 10 10, www.raider.bg;
www.euromasterbg.com; e-mail: info@euromasterbg.com.
Since 2006 the company has introduced and maintained its Quality Management System as per ISO 9001:2008 with a scope
of certification: Trade, import, export and service of hobby power, air and mechanical tools and hardware. The certificate was
issued by Moody International Certification Ltd., England.
Parameter
Type of model
Engine type
Cylinder displacement
Power
Type of spark plug
No-load speed
Clutch engagement speed
Maximum power speed
Fuel tank volume
Chain oil
Oil tank volume
Two-cycle oil/Gasoline mixing ratio
Chain pitch
Chain gauge
Number of drive link for chain saw 350 mm (14")
Sprocket
Original instruction manual
Dear user,

Technical Data

Units of
measurement
-
-
cm
3
kW
-
min
-1
min
-1
min
-1
ml
-
ml
-
Inch
Inch
-
-
13
Value
RD-GCS19
Air cooling single
cylinder, two stroke
58
2.2
Champion RCJ7Y,
NGK BPMR7A or
NHSP LD L8RTF
3 200
4 200
10 500
550
SAE 10W30
250
1:25
(1L fuel - 40ml oil)
0.325"
0.058"
72
7 teeth x 0.325"
(8,25mm)