Yamaha RX-V495 Mode D'emploi page 42

ADJUSTING THE DELAY TIME AND SPEAKER OUTPUT LEVELS
When using the digital sound field processor with the Dolby Pro Logic Surround decoder or the Dolby Digital decoder, you can
adjust the delay time between the main sound and sound effect, and each speaker's output level as you prefer.
Adjusting method
When adjusting with the remote control transmitter, press
AMP<TUNER> on the component selector.
1
Press TIME/LEVEL once or more until the name of the
item which you want to adjust appears on the display.
Front panel
When pressed, the selection changes as follows:
Delay time
D E L A Y
C E N T E R Center speaker output level
Right rear speaker output level
R S U R .
Left rear speaker output level
L S U R .
Subwoofer output level
S W F R
* Depending on the setting in the SET MENU mode, you
may not be able to select all items.
42
1
2
Remote control
or
1
2
Press + or – to adjust the settings for the delay time or
speaker output levels.
Front panel
3
Repeat steps 1 to 2 to adjust the settings of any other
item.
2
Remote control
or