Calf Support; Swivel Wheels - Graco Near2Me Manuel D'instructions

• The seat unit can be attached forward
or rearward facing on the stroller.
To Adjust The Height
Of Seat Unit
See images 19 20
To Use Canopy
See images 21 22

Calf Support

See images 23 24
To Recline Backrest
See images
25 26
To Secure Child - 5 Point
Harness
See images 27 - 29
• To avoid serious injury from falling or
sliding out, always secure your child
with harness.
• Make sure the harness is adjusted
properly and your child is snugly
secured. The space between the child
and the shoulder harness should be
about the thickness of one finger.
• DO NOT cross the shoulder belts. This
will cause pressure on child's neck.
To Adjust Shoulder Harness
Position
See images 30 - 32
• In order to protect your child from
falling out, after your child is placed
into the seat unit, check whether the
shoulder and waist harnesses are at
proper height and length.
• For larger child, use shoulder harness
anchor A and the highest shoulder
slots.
• For smaller child, use shoulder harness
anchor B and the lowest shoulder slots.
• To adjust the position of the shoulder
harness anchor, turn the anchor to
be level with the side facing forward.
Thread it through the shoulder harness
slot from back to front. 31 Rethread it
through the slot that is closest to child's
shoulder height. 32
Brake
See images
33 34
• Always apply the brake when the
stroller is stopped. Push the stroller
slightly to ensure the brake is engaged.

Swivel Wheels

See images 35 36
• It is recommended to use the front
swivel locks on uneven surfaces.
To Fold Stroller
See images 37 - 39
• Do not lock front wheels when folding
the stroller.
To Fold Stroller With Seat
Unit
See images -
40 44
• The stroller with seat unit can stand by
handle and the rear wheels after being
folded.
• Do not fold the stroller with the seat
unit when it is attached rear facing on
the stroller.
• Do not lock front wheels when folding
the stroller with seat unit.
To Attach Footmuff
See images 45 - 56
• Thread the buckle out of the
corresponding slots of the footmuff.
13
• Make sure the harness is adjusted
properly and your child is snugly
secured. The space between the child
and the shoulder harness should be
about the thickness of one finger.
To Attach and Remove
Near2Me Carry Cot (May
Not Be Included)
See images 57 - 59
• Remove the Near2Me carry cot before
folding the stroller.
To Attach and Remove
Graco® Click Connect™
Infant Car Seat (8AG/ 8AV/
8AO) (May Not Be Included)
See images 60 - 62
• The Graco® Click Connect™ infant
car seat can be attached forward or
rearward facing on the stroller.
• Remove the Graco® Click Connect™
infant car seat before folding the
stroller.
To Adjust The Height Of
Near2Me Carry Cot and Car
Seat (May Not Be Included)
See images 63 - 66
To Use Rain Cover
See image 67
To Use Seating Options
See image 68
49
53
14