Panasonic CS-V28BKP5 Mode D'emploi page 11

MODE
1
OFF/ON I
2
FAN SPEED
3
TEMP.
i
4
SWING MANUAL
5
FAN – Air Circulation Operation
When the room temperature reaches the setting
temperature, operation commences at Low air-
flow volume. It stops when the room temperature
drops to 2°C below the setting temperature (It is
useful when using a heater).
Automatic Airflow Volume
The speed of the indoor fan is adjusted automati-
cally according to the operation. The indoor fan
stops occasionally during cooling operation.
Press to select operation mode.
The display changes in the order
each time the button is pressed.
Press to start the operation.
Operation indication lamp (RED) will light up.
Press once more, to stop the operation.
Press to select airflow volume.
The display changes in the order.
Automatic Low
Press to select room temperature.
Cooling, Soft Dry, Air Circulation – Select temperature as desired.
(16°C ~ 30°C)
Automatic.
m n
2°C lower than
standard
MANUAL
Press continuously.
The vertical airflow direction louver will move up and down. Release the
button when the louver is at the desired position.
SWING
Press .
The vertical airflow direction louver will swing up and down automatically.
To stop the automatic airflow direction operation, press
Range of louver adjustment.
FAN
Medium
n
n o
standard 2°C higher than
standard
MANUAL
34°
High
button.
57°
10