How To Use This Manual - Kärcher Wet Dry Vacuum NT68/1 Mode D'emploi

How to Use This Manual

This manual contains the following sections:
- HOW TO USE THIS MANUAL
- SAFETY
- OPERATIONS
- MAINTENANCE
- PARTS LIST
The HOW TO USE THIS MANUAL section will tell you
how to find important information for ordering correct
repair parts.
Parts may be ordered from authorized dealers. When
placing an order for parts, the machine model and
machine serial numbers are important. Refer to the
MACHINE DATA log, which is filled out during the
installation of your machine. The MACHINE DATA
log is located on the inside of the front cover of this
manual.
Model:
Date of Purchase:
Serial Number:
Sales Representative:
Address:
Phone Number:
The model and serial number of your machine is on
the bottom back-end of the machine.
4
The SAFETY section contains important inform-
tion regarding hazardous or unsafe practices of the
machine. Levels of hazards are identified that could
result in product damage, personal injury, or severe
injury resulting in death.
The OPERATIONS section is to familiarize the
operator with the operation and function of the
machine.
The MAINTENANCE section contains preventive
maintenance to keep the machine and its compnents
in good working condition. They are listed in this gen-
eral order:
The PARTS LIST section contains assembled parts
illustrations and corresponding parts list. The parts
lists include a number of columns of information:
NOTE: If a service or option kit is installed on your
machine, be sure to keep the KIT INSTRUTIONS
which came with the kit. It contains replacement
parts numbers needed for ordering future parts.
98013230 WET DRY VACUUM
- Daily Maintenance
- Periodic Maintenance
- Carbon Brush Replacement
- Servicing the Filter
- Machine Troubleshooting
- REF – column refers to the reference
number on the parts illustration.
- PART NO. – column lists the part
number for the part.
QTY – column lists the quantity of the
-
part used in that area of the machine.
- DESCRIPTION – column is a brief
description of the part.
- SERIAL NO. FROM – If this column has
an (*) and a Reference number, see the
SERIAL NUMBERS page in the back of
your manual. If column has two asterisk
(**), call manufacturer for serial number.
The serial number indicates the first
machine the part number is applicable
to. The main illustration shows the most
current design of the machine. When a
boxed illustration is shown, it displays
the older design.
- NOTES – column for information not
noted by the other columns.