How The Machine Works; Components - Kärcher Wet Dry Vacuum NT68/1 Mode D'emploi

How This Machine Works
The machine is meant for wet cleaning, but can be used for cleaning dry surface with the optional dry filter.
The machine is equipped with a float shut-off. As the tank is filled to capacity, a float rises and seals the vacuum
intake, causing loss of vacuum. Switch off the vacuum when this happens and bring the machine to a floor drain.
To drain the machine use the hose at the back of the vacuum and empty into drain. With both wet and dry applica-
tions be sure to frequently clean the filter. This is especially true when the vacuum is being used with strippers and
wax.

Components

Note: Some components shown
are available on selected
models only or are options
available for purchase.
(For 230V, *EU Model)
5
1. Vacuum Cover
2. Filter
3. Tank
4. Squeegee Hose
(For Models 1.103-494.0,1.103-495.0 & 1.013-022.0)
5. Squeegee
(For Models 1.103-494.0, 1.103-495.0 & 1.013-022.0)
10
1
2
11
3
4
98013230 WET DRY VACUUM
(For 120V)
9
6. Squeegee Lift
(For Models 1.103-494.0, 1.103-495.0 & 1.013-022.0)
7. Drain Hose
8. Electrical Cord
9. Float & Float Cage
10. On/Off Switch
11. Filter (Dry) only for 230V *EU model
Operations
8
8
(For 230V, *EU Model)
6
7
15