Makita BHP444 Manuel D'instructions page 9

For Model BHP444
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-1:
Sound pressure level (L
Uncertainty (K): 3 dB (A)
The noise level under working may exceed 85 dB (A).
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745-2-1:
Work mode: impact drilling into concrete
Vibration emission (a
Uncertainty (K): 2 m/s
Work mode: drilling into metal
Vibration emission (a
For Model BHP454
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-1:
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745-2-1:
Work mode: impact drilling into concrete
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: drilling into metal
Vibration emission (a
EC-DECLARATION OF CONFORMITY
Model; BHP444, BHP454
We declare under our sole responsibility that this product
is in compliance with the following standards of
standardized documents;
EN60745, EN55014 in accordance with Council
Directives, 2004/108/EC, 98/37/EC.
Tomoyasu Kato
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
): 85 dB (A)
pA
2
): 9 m/s
h,D
2
2
): 2.5 m/s or less
h,D
): 86 dB (A)
pA
): 97 dB (A)
WA
2
): 7.5 m/s
h,ID
2
2
): 2.5 m/s or less
h,D
CE 2007
Director
ENG101-1
ENG203-1
ENG302-1
ENG102-1
ENG203-1
ENG302-1
ENH102-7
9