Interface Personalisation - Selco Genesis 4000 GSM Manuel D'instructions

Cancel the operation by pressing button (2)
Remove the selected program by pressing button (1)
.
Resume the storage procedure.
3 Program retrieval
Retrieve the 1st program available by pressing button
.
Select the required program by pressing button
Select the required program by rotating the encoder.
Only the memories location occupied by a program
are retrieved, while the empty ones are automatically
skipped.
4 Program cancellation
Select the required program by rotating the encoder.
Delete the selected program by pressing button (1)
.
Confirm the operation by pressing button (2)
Confirm the operation by pressing button (1)
Cancel the operation by pressing button (2)
48

3.9 Interface personalisation

.
Allows the parameters to be customized on the main menu.
500 Allows the selection of the required graphic interface:
XE (Easy Mode)
XA (Advanced Mode)
XP (Professional Mode)
PROCESS
MMA
XE
TIG DC
MIG/MAG
Pulsed MIG
MMA
XA
TIG DC
MIG/MAG
Pulsed MIG
MMA
XP
TIG DC
.
MIG/MAG
Pulsed MIG
1 7 segment display personalisation
Enter set-up by pressing the encoder button for at least
5 seconds.
.
Select the required parameter by rotating the encoder.
Store the selected parameter in the 7 segment display
by pressing button (2)
Save and exit the current screen by pressing button (4)
.
Default I1
.
.
PARAMETER
( )
(
(
.
)
)