Korona 46221 Manuel D'instructions page 32

1. After assembling the appliance, remove the grill rack (7),
heating element (4) and removable aluminium reflector
tray (3).
2. Fill between 0.4L to 0.9L of water into the drip pan of
the barbecue enclosure (housing) (2). Make sure not to
exceed the MAX (0.9L) level.
Caution! Make sure the appliance is shut off and
unplugged! Danger of electric shock.
3. Follow steps 3. – 6. under Assembly.
4. connect the appliance plug to a properly installed and
easy accessible wall socket.
5. Switch the appliance on by turning the temperature control
knob (5) to the highest level (MAX). Heat the appliance up
for approx. 10 Minutes. the indicator light (6) lights up.
After this heating up process, adjust the temperature by
turning the temperature control knob (5) to your desired
level. the integrated thermostat will keep the pre set
temperature at a constant level.
6. As soon as the respective temperature is reached the
indicator light (6) goes out.
Attention: the temperature control (5) is continuously
variable.
7. The appliance l is now ready for use. - Always place the
food to be grilled into the middle of the grill rack (7) –
During use the indicator light will will cycle on and off
while the thermostat keeps the heating element at the right
temperature.
8. After use, always turn the temperature control knob (5) to
MIN. and unplug the appliance.
32