Korona 46221 Manuel D'instructions page 28

1. take the metal poles (1) and insert the long pole (1) into
the short pole (1). Make sure that the holes of both poles
(1) are aligned. the shorter metal pole (1) should be facing
upwards towards the grill unit.
Short metal
pole
2. Attach the legs (metal poles) (1) of the stand to the metal
plates (3).
- Place the holes of the short as well as the long metal
plates (3) over the holes of the metal poles (1) and insert
the screw (4).
- Attach the nut (4) onto the screw (4) and slightly fasten it.
the long metal plates (3) should be attached to the front
and the short metal plates (3) should be attached to the
sides of the stand.
- Attach the remaining 3 legs (1) to the stand accordingly.
3. Now, fasten the nut (4).
28
Long metal
pole