Heath Zenith DualBrite 5312 Mode D'emploi

D B Motion Sensor
®
ual rite
Light Control
Models 5312 and 5318
Model 5318 meets the ENERGY
STAR
®
function is off and ON-TIME is 1 or 5
minutes and when used with 120 W
Max bulbs.
Features
• Turns on lighting when motion is detected.
• Automatically turns lighting off.
• D B Timer.
®
ual rite
• Photocell keeps the lighting off during daylight hours.
• LED indicates motion was sensed (day or night).
This package includes:
Bulb
Holders
Cover
Plate
Light Control
Mounting Bolt
Mounting Strap
2 Shells*
* Model SL-5318 only
© 2008 HeathCo LLC
guidelines when D B
ual
Rubber Plug
Plastic Hanger
Sensor
2 Wire
Connectors
Gasket
6 Screws
(3 sizes included)
• The light control requires 120-volts AC.
• If you want to use Manual Mode, the control must be
wired through a switch.
• Some codes require installation by a
qualified electrician.
• This product is intended for use with the enclosed
gasket and with a junction box marked for use in wet
locations.
OPERATION
®
rite
Mode:
Test
Auto
1, 5, or 20 Min
Manual
Accent 3, 6 Hr, to Dawn
* resets to Auto Mode at dawn.
Note: When first turned on wait about 1
the circuitry to calibrate.
Put ON-TIME switch
on the sensor bottom
to TEST and the D
B switch OFF.
®
rite
Put the ON-TIME switch in the 1, 5,
or 20 minute position.
Manual mode only works at night
because daylight returns the sensor
to AUTO.
Flip the light switch off for one second
then back on to toggle between AUTO
and MANUAL MODE.
Manual mode works only with the
ON-TIME switch in the 1, 5, or 20
position.
Requirements
On-Time Works: Day Night
5 Seconds
To Dawn*
1 /
TEST
ON-TIME D
-
ual
TEST 1 5 20 Off 3 6 Dusk to
AUTO
MANUAL MODE
1 Second OFF
x x
x
x
x
minutes for
2
B
®
ual rite
Dawn
ON-TIME
TEST 1 5 20
then...
... back on.
595-5731-08