Armani Exchange VX36 Instructions page 6

Chronograph Zero Reset
1 . If either of the chronograph hands is not at the zero (12:00) position, pull crown out
to position 3 .
2 . Press A to move hands clockwise; press B to move hands counter-clockwise .
3 . Return crown to position 1 .
AUTOMATIC 82SO/2189
82SO
1 . Pull crown out to position 2 .
2 . Turn crown clockwise to advance hour and minute hands .
3 . Push crown back to position 1 .
NOTE: A timepiece with an automatic winding movement obtains the power to wind itself
by the movement of your wrist, there is no battery. Therefore, not wearing the timepiece
for several consecutive days could exhaust the power reserve. If your watch stops, it is
recommended that you manually wind the movement by rotating the crown clockwise at
position 1 to achieve the necessary power reserve.
It is important your timepiece is adjusted to match the size of your wrist. A loose fit
may result in a loss in capacity of the timepiece to wind itself. When fully wound, your
timepiece has a power reserve of approximately 36 hours.
10
1 2 1 2
2189
DIGITAL LED – BJ-3470
A
Normal Time Display
1 . Press B to display time; press B again to change display mode . Mode sequence is time,
date and seconds .
2 . LED automatically turns off after 5 seconds .
Time / Calendar Setting
1 . In time display mode, press and hold A for 2 seconds to enter setting mode . 12/24-
hour format will begin flashing .
2 . Press B to choose 12 or 24-hour format . For 12-hour setting, "P" will be displayed for
afternoon/evening hours . For 24-hour setting, no symbol will be displayed .
3 . Press A to advance to hour .
4 . Press B to increase digits; press and hold B for fast advance .
5 . Press A to advance to next setting value .
6 . Setting sequence is: 12/24-hour format, hour, minutes, seconds, year, month, date, and
exit setting mode .
NOTE: In setting mode, if no pusher is operated for 5 seconds, all changes will be
saved and the watch will automatically turn off.
B
11