Steam Generator Cleaning; Steam Generator Decalcifi Cation; Fragrance Dosage; Proper Use Of Steam Function - HOESCH SensePerience Paneel Instructions De Planification, De Montage Et D'utilisation

04.03 Steam Generator Cleaning

The cleaning process is performed automatically after the steam bath and indicated by the ` - ´ symbol fl ashing in display [W1]. The
steam generator is emptied, fi lled and emptied again. The cleaning process takes 5.2 minutes. The steam function is blocked during the
cleaning process.
04.04 Steam Generator Decalcifi cation
Don't open the fi lling door while enjoying a steam bath. For your safety we
⚠
recomment to wait at least 30 minutes after using a steam bath till the cabine cools
off .
[W1] + [W2] flash
- the steam generator has been operating for 18 working hours, the system needs to be decalcifi ed!
Symbol „00" flashes in display [W1]
- the steam generator has been operating for 20 working hours and the steam function is blocked.
The system needs to be decalcified
For decalcifi cation, pour in 250ml of the liquid decalcifi er (i. e. HOESCH special softening agent Art.
Nr. 692101) and activate the process by keeping button 5 pressed for 10 seconds.
The decalcifi cation process can not be interrupted and is indicated by the symbol „00" appers in display [W1].
Decalcifi cation process duration = 65 minutes.
Grease the thread on both sides with commercially available grease after each descaling process.

04.05 Fragrance dosage

GB
Aromatic essences may only be added to the tank located on the steam nozzle.
Since scent extracts available in stores contain alcohol, only HOESCH scent extracts may
be used.
We will reject any claims on warranty if other scent extracts are used.
⚠
Be careful about direct skin contact near the steam outlet.
This can cause scalding!
05

Proper use of steam function!

First you take a shower and then use the steam bath. Before any steam bath, you should
take a shower, remove traces of soap and carefully wipe the whole body.
After getting the required temperature: enter the steam cabin and close the door carefully.
Please, avoid direct skin contact with the area of the steam outlet.
15 minutes is enough! First time use the steam bath only as long as you feel comfortable. We recommend maximum 15 minutes at 40
to 50°C. The best is taking a steam bath in the sitting position.
Steam bath duration should be controlled. You should never use more than 2-3 cycles of steam bath sequentially.
Steam is fragrant. The invigorating fragrances increase the refreshing eff ect and pleasure of the Roman steam bath. To increase the
steam bath eff ect, HOESCH fragrances can be added directly to the steam jet tank.
Alternating shower. At the end of each steam bath: cold shower. It has a refreshing eff ect. If you take warm shower, you will be relaxed
and muscle tension will reduce.
Relax. The best way is to lay down and relax this way relaxation eff ect and profi table steam bath eff ect for your body will be
strengthened.
Steam bath relaxes. The biggest advantage of steam bath is user friendly temperature from 40-50 °C and perfect combination of heat
and humidity.
Using the steam bath for children requires constant adult supervision.
Particular caution is advised when elderly and disabled person uses the steam bath.
16