Display Indications And Symbols - CIMCO 11 1410 Notice D'emploi

Display indications and symbols

REL Stands for relative value measurement (= reference measurement)
Auto stands for „automatic measuring range selection"
HOLD Displayed when hold function is active
Battery replacement symbol; please replace the
+
batteries immediately to avoid measuring errors!
Symbol for the diode test
Symbol for the acoustic continuity tester
AC Alternating magnitude for voltage and current
DC Identical magnitude for current
OL „Overload" displayed when measuring range exceeded
mV millivolt (exp.-3)
V Volt (unit of electric potential)
A ampere (unit of electric current)
Hz Hertz (unit of frequency)
kHz Kilohertz (exp.3)
Ω
Ohm (unit of electric resistance)
kΩ kiloohm (exp.3)
MΩ megaohm (exp.6)
nF Nanofarad (unit of electric capacity, exp.-9, symbol
μF Microfarad (exp.-6)
°C Degrees Celsius
°F Degrees Fahrenheit
)
35