Assistance; Kundendienst; Service - Indesit DIFP 68B1 Mode D'emploi

Masquer les pouces Voir aussi pour DIFP 68B1:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Assistance

EN
Before contacting Assistance:
• Check whether the problem can be resolved using the
Troubleshooting guide (see Troubleshooting).
• Restart the programme to check whether the problem
has ceased to exist.
• If the problem persists, contact the Authorised Technical
Assistance Service.
Never use the services of unauthorised technicians.
Please have the following information to hand:
• The type of malfunction.
• The appliance model (Mod.).
• The serial number (S/N).
This information can be found on the appliance data plate
(see Description of the appliance) .

Service

FR
Avant d'appeler le service d'assistance technique:
• Vérifier s'il est possible de résoudre l'anomalie soi-même
(voir Anomalies et remèdes).
• Faire repartir le programme pour s'assurer que
l'inconvénient a été résolu.
• Si ce n'est pas le cas, contacter un Service d'Assistance
Technique agréé.
Ne jamais faire appel à des techniciens non agréés.
Communiquer:
• le type d'anomalie;
• le modèle de l'appareil (Mod.);
• le numéro de série (S/N).
Ces informations figurent sur la plaque signalétique
apposée sur l'appareil (voir Description de l'appareil).
8
DE

Kundendienst

Bevor Sie den Kundendienst anfordern:
• sollten einige Kontrollen vorab selbst durchgeführt werden
(siehe Störungen und Abhilfe) .
• Starten Sie das Programm erneut, um sicherzustellen, dass
die Störung behoben wurde.
• Ist dies nicht der Fall, wenden Sie sich bitte an den
autorisierten Kundendienst.
Beauftragen Sie bitte niemals unbefugtes Personal.
Geben Sie bitte Folgendes an:
• die Art der Störung
• das Gerätemodell (Mod.)
• die Seriennummer (S/N).
Diese Informationen können Sie auf dem am Gerät
befindlichen Typenschild ablesen (siehe Beschreibung Ihres
Geschirrspülers).
Service
NL
Voordat u de Servicedienst inschakelt:
• Dient u te controleren of u de storing zelf kunt oplossen
(zie Storingen en Oplossingen).
• Start het programma opnieuw om te controleren of het
probleem is opgelost.
• Als dit niet het geval is dient u de erkende Technische
Servicedienst in te schakelen.
Wendt u nooit tot niet erkende technici.
U dient door te geven:
• het type storing;
• het model van het apparaat (Mod.);
• het serienummer (S/N).
Deze informatie bevindt zich op het typeplaatje op het
apparaat (zie Beschrijving van het apparaat).

Publicité

Table des Matières
loading

Table des Matières