Pioneer GM-D9605 Mode D'emploi page 4

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Section
01
Before you start
! In the event of any abnormality, the power
supply to the amplifier is cut off to prevent
equipment malfunction. If this occurs, switch
the system power off and check the power
supply and speaker connections. If you are un-
able to determine the cause, please contact
your dealer.
! Always disconnect the negative * terminal of
the battery beforehand to avoid the risk of
electric shock or short circuit during installa-
tion.
! Do not attempt to disassemble or modify this
unit. Doing so may result in fire, electric
shock or other malfunction.
CAUTION
! Always keep the volume low enough to hear
outside sounds.
! Extended use of the car stereo while the en-
gine is at rest or idling may exhaust the bat-
tery.
About the protection function
This product has protection function. When this
product detects something abnormal, the follow-
ing functions will operate to protect the product
and speaker output.
! The POWER/PROTECT indicator will turn red
and the amplifier will shut down in the situa-
tions outlined below.
— If a DC voltage is applied to the speaker
output terminal.
! The POWER/PROTECT indicator will turn red
and the output will be muted in the situations
outlined below.
— If the speaker output terminal and speaker
wire are short-circuited.
— If the subwoofer output terminal and sub-
woofer wire are short-circuited.
! The amplifier will reduce the power output if
the temperature inside the amplifier gets
high. If the temperature gets too high, the
POWER/PROTECT indicator will turn off, and
the amplifier will shut down.
4
En

Publicité

Table des Matières
loading

Table des Matières