Pioneer GM-D9605 Mode D'emploi page 13

Connecting the units
Connecting the speaker/
subwoofer output terminals
1 Use wire cutters or a utility knife to
strip the end of the speaker/subwoofer
wires to expose about 10 mm (3/8 in.) of
wire and then twist the wire.
2 Connect the speaker/subwoofer wires
to the speaker/subwoofer output term-
inals.
Fix the wires securely with the terminal
screws.
1
1
1 Terminal screws
Tighten the screws with a 1.5 mm (1/8 in.)
hexagonal wrench for terminal screws of
the speaker and a 3 mm (1/8 in.) hexagonal
wrench for terminal screws of the subwoo-
fer.
2 Speaker wires
3 Speaker output terminals
4 Subwoofer wires
5 Subwoofer output terminals
Twist
10 mm (3/8 in.)
3
2
5
4
Section
03
13
En