Olympia MC 408.2 Mode D'emploi page 18

Paper Shredder MC 408.2 / 510.2 / 615.2
Operating the Paper Shredder
Clearing Residual Material
1. Use the main switch to switch the device off.
2. Disconnect the power plug from the power socket.
CAUTION!
• Risk of injury through the sharp edges of the cutting mech­
3. Remove the residual material carefully from the cutting mechanism using an
appropriate pointed object.
Emptying the Waste Bin
The waste bin must be emptied regularly in order to prevent material jams.
The AUTO button flashes blue when the waste bin has been removed.
1. Use the main switch to switch the device off.
2. Pull the waste bin out of the device by the handle.
3. Empty the waste bin.
4. Install the waste bin back in the device.
Lubricating the Cutting Mechanism
To ensure a long service life for the device, it is essential to oil the cutting mecha­
nism at regular intervals.
ATTENTION!
• Property damage!
1. Apply the special oil for shredders in several lines square to the sheet of paper.
2. Insert the oiled sheet of paper in the paper infeed.
GO Europe GmbH offers a special paper oil for shredders. Please contact
the Service hotline (refer to Guarantee).
18
anism!
Never reach into the cutting mechanism.
Keep fingers and hands away from the paper infeed.
Do not use spray oils.
Only use a special oil intended for shredders.
Gi