Ec Declaration Of Conformity; Instruction Manual - Makita DHR280 Manuel D'instructions
Masquer les pouces
Voir aussi pour DHR280:
- Manuel d'instruction (77 pages) ,
- Manuel d'instructions (156 pages) ,
- Manuel d'instructions (156 pages)
Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Vibration
The following table shows the vibration total value
(tri-axial vector sum) determined according to applica-
ble standard.
Model DHR280
Work mode
Vibration
emission
2
Hammer
9.0 m/s
drilling into
concrete
(a
)
h, HD
2
Hammer
8.0 m/s
drilling into
concrete with
DX08 (a
)
h, HD
2
Chiselling func-
8.5 m/s
tion with side
grip (a
)
h, Cheq
2
Drilling into
2.5 m/s
metal (a
)
h, D
Model DHR281
Work mode
Vibration
emission
2
Hammer
9.5 m/s
drilling into
concrete
(a
)
h, HD
2
Hammer
8.0 m/s
drilling into
concrete with
DX09 (a
)
h, HD
2
Chiselling func-
9.0 m/s
tion with side
grip (a
)
h, Cheq
2
Drilling into
2.5 m/s
metal (a
)
h, D
Uncertainty (K) Applicable
standard
2
1.5 m/s
EN60745-2-6
2
1.5 m/s
EN60745-2-6
2
1.5 m/s
EN60745-2-6
2
1.5 m/s
EN60745-2-1
Uncertainty (K) Applicable
standard
2
1.5 m/s
EN60745-2-6
2
1.5 m/s
EN60745-2-6
2
1.5 m/s
EN60745-2-6
2
1.5 m/s
EN60745-2-1
Model DHR282
Work mode
Vibration
emission
Hammer
9.0 m/s
drilling into
concrete
(a
)
h, HD
Hammer
8.0 m/s
drilling into
concrete with
DX08 (a
)
h, HD
Chiselling func-
8.0 m/s
tion with side
grip (a
)
h, Cheq
Drilling into
2.5 m/s
metal (a
)
h, D
Model DHR283
Work mode
Vibration
emission
Hammer
9.5 m/s
drilling into
concrete
(a
)
h, HD
Hammer
8.0 m/s
drilling into
concrete with
DX09 (a
)
h, HD
Chiselling func-
8.5 m/s
tion with side
grip (a
)
h, Cheq
Drilling into
2.5 m/s
metal (a
)
h, D
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
WARNING:
actual use of the power tool can differ from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING:
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
11 ENGLISH
Uncertainty (K) Applicable
2
2
1.5 m/s
2
2
1.5 m/s
2
2
1.5 m/s
2
2
1.5 m/s
Uncertainty (K) Applicable
2
2
1.5 m/s
2
2
1.5 m/s
2
2
1.5 m/s
2
2
1.5 m/s
The vibration emission during
Be sure to identify safety mea-
standard
EN60745-2-6
EN60745-2-6
EN60745-2-6
EN60745-2-1
standard
EN60745-2-6
EN60745-2-6
EN60745-2-6
EN60745-2-1
Publicité
Table des Matières
