Johnson Controls SABROE ComPAC Serie Mode D'emploi page 61

Annexes
3. Press Arrow up (no. 4) once to change the digit to 2.
4. Press Arrow right (no. 1) again → passcode required → press the buttons: 1-2-3-4-1-2,
see Fig. 29.
Fig. 29
Example: how to change a parameter in the supervisor menu
Change of gas constant 2.5.3 to value according to the list in . If in doubt, choose the lowest
value belonging to the lower end of your operating range.
1. Change the text in the upper line in the display to 2.5.3:
• Press Arrow right (no. 1) – the second digit is marked, see Fig. 30.
Fig. 30
• Press Arrow up (no. 4) until 1 has turned to 5.
• Press Arrow right (no. 1) – the third digit is marked, see Fig. 31.
Fig. 31
Mode d'emploi – ComPAC
011769 fr 09/2022 61/69