Philips Aquazur HI845 Mode D'emploi page 13

Storage
1 Make sure the appliance is unplugged.
C
2 Empty the water tank.
3 Put the iron on the rubber mat and let it cool down sufficiently
before you store it.
Replacement
The Philips Aquazur has a disposable anti-calc cassette that filters the
water in the water tank. After some time the cassette will be saturated
and should be replaced by a new one. How often the cassette should
be replaced depends on the water hardness in your area and how
often you use the iron.
- If the water is very hard, replace the cassette every 3 months.
- If the water is moderately hard, replace the cassette every 9 months.
Turn to your local water board for information about the water hardness
B
in your area.
To replace the cassette:
C
1 Press the cassette release button and remove the cassette.
C
2 Empty the water tank and the cassette compartment.
3 Enter the current date on the new cassette and insert it into
the water tank.
4 Fill the water tank with water.
Set the temperature dial to 3 and set the steam control to
5
position 4.
6 Squeeze the steam trigger for about one minute.The new
cassette is now filled with water.
You can resume ironing.
ENGLISH
13