Johnson Outdoors MINN KOTA MKA-51 Guide D'installation page 5

Installing the Top Plate to a DeckHand 40
1
ITEM(S) NEEDED
a. Position the DeckHand 40 Base and Davit over the
Top Plate Assembly (Assembly #C) and mount the
Bracket using only the four holes that are farthest
Outboard. The two holes closest Inboard are not
used to install the Bracket.
b. Take four 1/4-20 X 7/8 Stainless Steel Screws
(Item #4) and insert them from the bottom of the
Outer Plate through the DeckHand 40. Secure each
Screw with a 9/32 X 5/8 X 1/16 Flat Washer
(Item #10) and a 1/4-20 Nylock Nut (Item #6).
1a
5 | minnkotamotors.com
#4 x 4
#C x 1
1b
Flat Washer Flat Washer
Outboard Outboard
Inboard Inboard
Mounting Mounting
Holes Holes
Top Plate Top Plate
Inboard Inboard
#10 x 4
Nylock Nut Nylock Nut
©2020 Johnson Outdoors Marine Electronics, Inc.
#6 x 4
Outboard Outboard
DeckHand 40 DeckHand 40
Base and Davit Base and Davit
Top Plate Top Plate
Stainless Stainless
Steel Screw Steel Screw