Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Completing the Installation
1
a.
Slide the Top Plate attached to the motor back onto
the Bottom Plate that was mounted to the Bow
of the boat and secure with the Cam Lever and
Pin. Always check to be sure that the Cam Lever
is latched and the latch is secured with the Pin to
ensure that the Cam Lever remains latched.
NOTICE:
Lock your motor to
help prevent theft. The motor
can also be locked when it is
slid 6 inches backwards.
For warranty information, please visit
minnkotamotors.com
Part #2377169
minnkotamotors.com.
Minn Kota Consumer & Technical Service
Johnson Outdoors Marine Electronics, Inc.
PO Box 8129
Mankato, MN 56001
Top Plate
Top Plate
Cam Lever
Cam Lever
Pin
Pin
121 Power Drive
Mankato, MN 56001
Phone (800) 227-6433
Fax (800) 527-4464
ECN 41445
Bottom
Bottom
Plate
Plate
©2020 Johnson Outdoors Marine Electronics, Inc.
All rights reserved.
Rev C
11/20
Publicité
Table des Matières
