Operating - Johnson Outdoors MINN KOTA MKA-51 Guide D'installation

The MKA-51 Quick Release Bracket is designed to be locked in
two different positions. The first position aligns the Top Plate and
Bottom Plate and locks them in place with the Cam Lever.
This position is used when the motor is operating. The second
position allows the Top Plate to be slid back or inboard 6 inches
before it is locked in place and is used during transporting.
To slide the bracket, open the Cam Lever and slide the Top Plate
approximately 1½ inches sideways or Port side, then sliding the
plates lengthwise. Slide the Top Plate sideways again to close the
1½ inch gap and close the Cam Lever to lock the plates together.
The Top Plate can be separated from the Bottom Plate when slid
into either of the two positions while a sideways gap is present
between the plates.
The MKA-51 Quick Release Bracket is designed to work on a number of Minn Kota trolling motors. The base extrusion or mounting
bracket of the trolling motors may vary. Please note the appearance of the applicable trolling motors and mounting bracket. For a
complete list of motors compatible with the MKA-51, please refer to the website at minnkotamotors.com.
Inboard Inboard
PowerDrive, PowerDrive,
PowerDrive V2 PowerDrive V2
INSTALLATION
Installing the Top Plate to a Terrova, PowerDrive or PowerDrive V2
1
a. Make sure that the Power Cables from the battery
are disconnected, or that the breaker,
if equipped, is "off."
b. Place the mount on an elevated, level surface such
as a workbench or the tailgate of a pickup. The
motor should be in the stowed position.
Deployed Deployed
2 | minnkotamotors.com
Inboard Inboard
Ulterra Ulterra
Stowed Stowed

Operating

Complete Complete
Typical Typical
Installation Installation
Inboard Inboard
Terrova Terrova
Power Cables Power Cables
NOTICE:
A motor may weigh up to 65lbs. We recommend
having a second person help with the installation.
Transporting
Complete Complete
Typical Typical
Installation Installation
Inboard Inboard
DeckHand 40 DeckHand 40
©2020 Johnson Outdoors Marine Electronics, Inc.