Installation; Pump Assembling - Varian 919-0520 Manuel D'instructions

INSTALLATION

Pump Assembling

Before installing the pump into the system, the
pump must be assembled.
To assemble the pump proceed as follows (see
the following figure):
1. Remove the pump parts from the packaging.
2. Remove the fixing clip (3) from the magnet
(2).
3. Insert the pump (1) into the magnet.
4. Fix the pump to the magnet by means of the
fixing clip.
Model 919-0524
Magnet model 919-0038
12
TECHNICAL INFORMATION
Pump assembly
87-900-091-01(B)