cecotec GrandHeat 2000 Manuel D'instructions page 57

ENGLISH
Open the door, fix the microwave onto the cabinet with a screw through the installation hole.
Then, fix the plastic cover onto the installation hole.
4. OPERATION
Fig. 12
1. Micro/Grill/Combi
2. Defrost by weight / Time
3. Increase
4. Decrease
5. Timer / Clock
6. Stop / Clear
7. Start / +30Sec / Confirm
8. Door opening
Fig. 13
Clock setting
When the device is plugged in, it will beep once and the display will show "00:00".
Tap Clock/Timer twice to set the time. The hour digits will blink.
Turn the knob to set the desired hour, from 00-23.
Tap Clock/Timer. The minutes digits will blink.
Turn the knob to set the desired minutes, from 00-23.
Tap Clock/Timer to save the time settings. ":" will flash and the time will light.
Note:
If the clock is not set, the current time will not be displayed when the device is turned on.
During the process of clock setting, press " Stop/Clear ", to go back to the previous status
automatically.
Microwave cooking
Tap Microwave/Grill/Combi once. "P100" will be displayed on the screen.
Tap Microwave/Grill/Combi several times or turn the knob to select the microwave power:
"P100", "P80", "'P50", "P30" or "P10".
Tap the Start/+30sec/Confirm icon to confirm.
Turn the knob to set the desired cooking time. The set time should be 0:05-95:00.
Tap the Start/+30sec/Confirm icon to start cooking.
Example: Cooking at 80 % microwave power for 20 minutes.
Tap Microwave/Grill/Combi once. "P100" will be displayed on the screen.
57
GRANDHEAT 2500 BUILT-IN TOUCH STEEL BLACK