cecotec GrandHeat 2000 Manuel D'instructions page 56

ENGLISH
Never place the glass tray upside down.
Both glass tray and glass tray ring assembly must always be used during cooking.
All food and food containers must always be placed on the glass tray for cooking.
If the glass tray or the ring assembly cracks or breaks, contact the Technical Support Service
of Cecotec.
Note: This appliance is intended for built-in use only. It is not intended for counter-top use
or for use inside a cupboard. The appliance must be installed in a 60-cm wide wall-mounted
cupboard.
Electrical connections
If the plug is no longer accessible after installation, an all-pole isolating switch must be on one
of the sides with a contact gap of 3 mm.
The fitted cabinet must not have a back wall behind the appliance.
The minimum height installation must be 85 cm.
Do not cover the ventilation slots.
Microwave
Fig. 3.
Screws
Fig. 4.
Mounting bracket
Fig. 5.
Built-in furniture
Fig. 6.
Preparing the cabinet
Fig. 7.
Read the instructions on the bottom of the cabinet. Put the template on the bottom plane of
the cabinet.
Fig. 8.
Make the marks on the bottom part of the cabinet according to the "a" marks on the template.
Fig. 9.
Remove the bottom cabinet template and fix the mounting plate with a screw.
Microwave installation
Fig. 10.
Install the microwave in the cabinet. Make sure the back of the device is locked by the mounting
plate. Do no trap the power cord.
Fig. 11.
56
GRANDHEAT 2500 BUILT-IN TOUCH STEEL BLACK