Cleaning And Maintenance - cecotec GrandHeat 2000 Manuel D'instructions

ENGLISH
Turn the knob to adjust the cooking time to 7 minutes. The screen will display "7:00".
Tap the Start/+30sec/Confirm icon to start cooking.
The device will beep each time a sequence is completed. When the whole process is completed,
the device will beep 5 times.
Checking settings
During operation, tap the Microwave/Frill/Combi icon, the current power level will be displayed
for 3 seconds.
During operation, tap the Clock/Timer icon, the current time will be displayed for 3 seconds.
Child lock system
In standby mode, tap the Stop/Clear for 3 seconds. The device will emit a long beep indicating
this function has been activated.
The current time will be displayed if the clock is set. The following icon will also be displayed:
In standby mode, tap the Stop/Clear for 3 seconds. The device will emit a long beep indicating
this function has been deactivated.
Specifications
Tap the Start/+30sec/Confirm icon to continue cooking after the door has been opened during
cooking.
Once a cooking program has been set, if the Start/+30sec/Confirm icon is not pressed within 5
minutes, the settings will be cancelled.
Every time an icon is touched, a beep sounds.
When a cooking program is completed, the device beeps 5 times.
Microwave door
To open the door, tap the Door opening icon.
Fig. 14.

5. CLEANING AND MAINTENANCE

The device, as well as food rests, must be cleaned and removed regularly.
Unplug the cable from the power supply before starting the cleaning. Do not immerse the
product in water or any other fluid during cleaning.
The lack of maintenance and cleaning of the product may cause a deterioration on its surface
and affect its lifespan.
Do not use strong detergents, powder abrasives or metal brushes to clean the device.
Do not remove the mica plate.
When the microwave has been used for a long time, some strong odours may arise from inside.
In order to get rid of them, follow one of the steps below:
61
GRANDHEAT 2500 BUILT-IN TOUCH STEEL BLACK