Before You Begin; Step 1: Determine Best Location - Honeywell Home HE120 Instructions D'installation

HE120 BY-PASS DRUM HUMIDIFIER

BEFORE YOU BEGIN

When Installing this Product...
1. Read these instructions carefully. Failure to follow
them could damage the product or cause a hazard-
ous condition.
2. Installation of this Humidifier requires several steps.
Read and understand instructions completely before
beginning installation.
3. After installation is complete, check out product
operation as provided in these instructions.
STEP 1: DETERMINE BEST
LOCATION
CAUTION
Freezing Water Hazard.
Can result in water damage to property.
Locate Humidifier where the ambient temperature
o
is between 32 F and 160
1. Select a location to mount the Humidifier on the
supply (warm air) or return duct. See Fig 1.
• Select a location that can not damage the air
conditioner coil during installation.
• Do not locate Humidifier on furnace cabinet.
• Allow adequate clearance in front of and above
the Humidifier so you can easily remove cover
and perform maintenance.
• Allow enough space for the drain or overflow tube.
• Mount Humidifier in conditioned (heated) space
to prevent freezing.
• Select a location where the 3 ft. of Bypass Duct is
adequate to connect the Humidifier to the Bypass
Collar.
HUMIDIFIER
BYPASS
COLLAR
H O
O Y
W B
L O
Fig. 1. Typical Humidifier installation locations.
69-1860EF—02
o
F.
L
T A
O N
R I Z
H B
H I G
W N
D O
O
F L
M12248D
NOTE: The Bypass Duct can be connected to either side
of the Humidifier Housing. See Fig. 2.
2. Select a location for the Bypass Collar on the oppo-
site duct. See Fig. 1. (The Humidifier is designed to
allow Bypass Duct mounting on either side of the
Humidifier. See Fig. 2.)
• Do not locate Bypass Collar on furnace cabinet.
• Select a location where the 3 ft. of Bypass Duct is
adequate to connect the Humidifier to the Bypass
Collar.
• Allow enough room for the optional Damper.
Fig. 2. Available Bypass configurations.
O Y
4