Step 5: Assemble Humidifier Drum - Honeywell Home HE120 Instructions D'installation

HE120 BY-PASS DRUM HUMIDIFIER
STEP 5: ASSEMBLE
HUMIDIFIER DRUM
1. Slide Closed Drum End over Drum Shaft with round
posts facing away from metal tabs. See Fig. 16.
(Slots in cone end should rest over metal tab.)
METAL
TAB
SLOT IN
CLOSED
DRUM END
Fig. 16. Installing Closed Drum End.
2. Secure Closed Drum End to Drum Shaft using
Spring Retainer. See Fig. 17. (Squeeze spring ends
slightly to install.)
Fig. 17. Installing Spring Retainer.
69-1860EF—02
3. Slide Humidifier Pad over closed drum end posts.
See Fig. 18.
4. Slide Open Drum End over Drum Shaft with round
posts inside Humidifier Pad. See Fig. 19.
5. Secure Open Drum End to shaft using Spring
M13622
Retainer. (Squeeze spring ends slightly to install.)
10
Fig. 18. Installing Humidifier Pad.
Fig. 19. Installing Open Drum End.
SPRING
RETAINER
M13623