Dell PowerConnect 7000 Serie Guide De Mise En Route page 18
Masquer les pouces
Voir aussi pour PowerConnect 7000 Serie:
- Guide de maintenance (105 pages) ,
- Mode d'emploi (101 pages) ,
- Manuel du propriétaire (77 pages)
Publicité
Les langues disponibles
Les langues disponibles
Figure 1-11. Attaching the Brackets
2 Insert the supplied bolts into the rack-mounting holes and tighten with a
screwdriver.
3 Repeat the process for the rack-mounting bracket on the other side of the
switch.
4 Insert the switch into the 48.26 cm (19 inch) rack, ensuring that the rack-
mounting holes on the switch line up to the mounting holes in the rack.
5 Secure the switch to the rack with either the rack bolts or cage nuts and
cage-nut bolts with washers (depending on the kind of rack you have).
Fasten the bolts on bottom before fastening the bolts on top.
CAUTION:
rack.
NOTE:
Make sure that the ventilation holes are not obstructed.
16
Getting Started Guide
Make sure that the supplied rack bolts fit the pre-threaded holes in the
Publicité
