Troubleshooting - HAMPTON BAY 51859 Guide D'utilisation Et D'entretien

Troubleshooting

Problem
The fire table will not light.
The burner does not light using a
match.
The fire table emits a lot of black
smoke when lit.
There is a sudden drop in the gas
flow.
The flame blows out.
Cause
□ The igniter pin and burner are wet.
□ The igniter battery is incorrectly inserted.
□ The igniter pin is cracked or broken.
□ The electrode wire is loose or disconnected.
□ The electrode wire is shorting between the
valve and the igniter pin.
□ There is no gas flow.
□ Gas flow is obstruced.
□ The regulator is not fully connected.
□ There are spider webs in the venturi.
□ The burner ports are clogged.
□ The flame is obstructed at the burner ports.
□ The regulator hose is pinched.
□ The excess flow safety valve has been
activated.
□ There is no gas flow.
□ There are high or gusty winds.
□ There is no gas flow.
□ Wipe dry with a cloth.
□ Check that the battery is correctly inserted.
□ Call customer service for replacement part.
□ Reconnect the wire to the igniter box located
inside the table base behind the igniter
button.
□ Call customer service for replacement part.
□ Check if the gas cylinder is empty.
□ Check the LP gas connection.
□ Check the hose for bends or kinks.
□ Clean the venturi.
□ Insert an opened paperclip into each of the
burner ports to clean them. Ensure the fire
table is off and all parts are cooled before
attempting to clean the burner ports.
□ Make sure all burner ports are free of any lava
rocks or debris to allow the gas to flow freely.
□ Check the regulator hose for bends or for
kinks.
□ Turn the control knob to "OFF", close the LP
tank valve and disconnect the regulator from
the tank. Turn the control knob to "HIGH".
Wait 1 minute. Turn the control knob to "OFF".
Reconnect the regulator to the LP tank. Open
the tank valve slowly. Light the fire table as
indicated in step 3 of the Operation section.
□ Check if the gas cylinder is empty.
□ Increase the flame to "High".
□ Check if the gas cylinder is empty.
14
Solution