HAMPTON BAY 51859 Guide D'utilisation Et D'entretien page 10

Assembly (continued)
3
Installing the tank
□ Remove the door (B) from the body (A) and place a 20 lb.
propane gas tank (not included) into the metal stand inside
the body (A). Be sure to tighten the preassembled wing
screw on the metal tank stand. Replace the door (B) on the
body (A).
5
Connecting the tank
CAUTION: Always confirm that the burner control knob is
in the "OFF" position before connecting the gas supply.
□ Ensure that there is no debris caught in the head of the
propane (LP) cylinder or head of the regulator valve.
□ Insert the nipple of the regulator (1) into the cylinder valve (3) and
tighten the black coupling nut (2) by turning it clockwise as shown in
the diagram to the right. Hand tighten only.
□ Once the regulator (2) is connected to the cylinder valve (3),
be sure that all connections are tightened before
lighting the fire table.
4
Placing the lava rocks
CAUTION: DO NOT cover the burner screen with lava
rocks. Always keep the screen visible.
□ Place the lava rocks (C) evenly in the fire table on the top of
the body (A).
A
A
(2)
Turn clockwise to connect
(1)
10
SCREEN
C
(3)
PRESSURE
RELIEF VALVE
BLEED-OFF
VALVE
Turn clockwise
to reseal