Whirlpool Cabrio WTW7800XL Guide D'utilisation Et D'entretien page 17

TROUBLESHOOTING
First try the solutions suggested here or visit our website at www.whirlpool.com/help
If you experience
Washer not performing as expected (cont.)
Fabric Damage
Incorrect dispenser
operation
for assistance and to possibly avoid a service call.
Possible Causes
Sharp items were in pockets during
wash cycle.
Strings and straps could have tangled.
Items may have been damaged before
washing.
Fabric damage can occur if load is
tightly packed.
Liquid chlorine bleach may have been
added incorrectly.
Garment care instructions may not
have been followed.
Clogged dispensers or laundry
products dispensing too soon.
Liquid chlorine bleach not
used in dispenser or Oxi option
not selected.
Empty pockets, zip zippers, and snap or hook fasteners before
washing to avoid snags and tears.
Tie all strings and straps before starting wash load.
Mend rips and broken threads in seams before washing.
Load garments in loose heaps evenly around the basket wall.
Use cycle designed for the fabrics being washed.
Add only 1 or 2 garments after washer is started.
Load items should move during wash to avoid damage
Do not pour liquid chlorine bleach directly onto load. Wipe up
bleach spills.
Undiluted bleach will damage fabrics. Do not use more than
recommended by manufacturer.
Do not place load items on top of bleach dispenser when
loading and unloading washer.
Always read and follow garment manufacturer's care
label instructions.
Do not overfill dispenser. Overfilling causes immediate dispensing.
Always select Fabric Softener and/or Oxi options to assure proper
dispensing.
Load dispensers before starting a cycle.
It is normal for small amounts of water to be remain in dispenser at
the end of the cycle.
Homes with low water pressure may result in residual powder in the
dispenser. To avoid, select a warmer wash temperature if possible,
depending on your load.
Use only liquid chlorine bleach in the Bleach/Oxi dispenser.
You may use powdered or liquid laundry boosters in the Bleach/
Oxi dispenser. Always select the Oxi option for proper flushing of
Oxi products from dispenser. Leftover powder may be wiped out by
hand, if needed. Otherwise, select Oxi option with the next cycle to
rinse out dispenser.
Solution
17