Kohler K-77685 Guide D'installation Et D'entretien page 8

Maintenance
Routine maintenance and filter cartridge replacement will not require
that the tubing be disconnected. Follow this procedure if it becomes
necessary to disconnect the tubing from the fittings.
• Turn off the cold water supply to the filtration system, and turn
on the faucet to relieve water pressure.
• Firmly press in the collar around the fitting while using your
hand to pull the tubing free.
• Inspect the tubing for damage or crimping.
• Refer to the "Connect the Tubing" section to reinstall the tubing.
• Refer to the replacement filter cartridge installation instructions to
replace the filter cartridge.
Troubleshooting
This troubleshooting guide is for general aid only. For warranty
service, contact your dealer or wholesale distributor.
For service parts and replacement filter cartridges, visit your product
page at www.kohler.com.
Symptoms Probable Causes
1. Water leaks A. An O-ring is
between the
filter head and
the filter
cartridge.
1285422-2-A
Recommended Action
A. Turn off the water
damaged, dirty, or supply, and relieve
out of place. water pressure.
Remove the filter
cartridge and inspect
the O-rings for
damage or debris,
and ensure the
O-rings are in place.
Reinstall the filter
cartridge, turn on the
water supply, and
check for water
leakage.
8 Kohler Co.