Kohler K-77685 Guide D'installation Et D'entretien page 5

2" (51 mm)
Min
2. Mount the Filter Head
IMPORTANT! This unit is designed for vertical installation.
IMPORTANT! The mounting location of the water filtration system
is critical. Verify that the bottom of the filter cartridge will be at least
2" (51 mm) from the floor of the cabinet. Ensure that the system will
not interfere with other items and will be easily accessible. Make
sure the tubing will not be under tension when installed.
IMPORTANT! Only connect water from the supply line to the filter
head inlet. Only connect water from the filter head outlet to the
faucet. System performance and filter cartridge capacity will be
compromised if connected incorrectly. "INLET" and "OUTLET" are
molded into the filter head and are visible by removing the cover.
NOTICE: Select mounting fasteners (not provided) appropriate for
the cabinet wall material.
Align the mounting holes of the filter head at the determined
mounting location.
Mark the mounting hole locations with a permanent marker. Set
the filter head aside.
Pre-drill the mounting holes, if necessary, based upon the
fasteners selected.
Partially thread the fasteners into the cabinet wall, and slide the
filter head over the fasteners.
Secure the filter head in position by tightening the fasteners.
Kohler Co. 5 1285422-2-A