Denon DVD-1000 Mode D'emploi page 10

ENGLISH
(2) Connecting to a TV or Monitor Equipped with Color Component Input Connectors
Color component output connectors (C
The red (C
of the colors.
• The color component input connectors may be marked differently on some TVs or monitors (P
Y, B-Y and Y/C
DVD-1000
NOTES:
• Use the three commercially available video cords to connect the DVD-1000's color component output connectors to the TV or
monitor.
• Set the "AUDIO OUTPUT" in "AUDIO SETUP" in "SETUP" setting to "ANALOG". (See page 38. Default setting is "ANALOG".)
• Set the "TV TYPE" in "VIDEO SETUP" in "SETUP" comply with your TV's video format. When the TV is NTSC formated set to
NTSC. (See page 37)
10
), blue (C ) and brightness (Y) signals are output independently, achieving more faithful reproduction
R B
, C and Y, etc.). For details, refer to the TV's operating instructions.
R B
DIGITAL OUT AUDIO VIDEO
OUT OUT
(PCM/BITSTREAM)
L
COAXIAL OPTICAL
R
AUDIO IN
, C and Y)
R B
S-VIDEO
COMPONENT
OUT VIDEO OUT
C C Y
R B
L
R
, P and Y/R-
R B
To power outlet
TV
C C Y
R B
COMPONENT VIDEO IN