Cutting Attachment; Mounting The Bar And Chain - Stihl MS 193 Notice D'emploi

Masquer les pouces Voir aussi pour MS 193:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English

Cutting Attachment

A cutting attachment consists of the saw
chain, guide bar and chain sprocket.
The cutting attachment that comes
standard is designed to exactly match
the chain saw.
1
a
The pitch (t) of the saw chain (1),
chain sprocket and the nose
sprocket of the Rollomatic guide bar
must match.
The drive link gauge (2) of the saw
chain (1) must match the groove
width of the guide bar (3).
If non-matching components are used,
the cutting attachment may be damaged
beyond repair after a short period of
operation.
18
Chain Scabbard
2
Your saw comes standard with a chain
scabbard that matches the cutting
attachment.
3
If guide bars of different lengths are
mounted to the saw, always use a chain
scabbard of the correct length which
covers the complete guide bar.
The length of the matching guide bars is
marked on the side of the chain
scabbard.

Mounting the Bar and Chain

Releasing the chain brake
4
Pull the hand guard (4) toward the
N
handle until there is an audible click
– the chain is disengaged.
Removing the chain sprocket cover
6
5
Unscrew the nut (5) and remove the
N
cover (6).
MS 193 C

Publicité

Table des Matières
loading

Table des Matières