Install The Power Cord Storage Arms; Install The Upper Handle; Install The Wheels; Install The Spray Wand - GreenWorks ELITE EPW2000 Manuel De L'utilisateur

EN
3.6 INSTALL THE POWER CORD
STORAGE ARMS
13
1. Attach each of the power cord storage arms (8) into the
two separate positions on the lower handle of the fixture.
2. Align the screw (13) with the holes in each of the two
power cord storage arms (8).
3. Push the screw (13) through and tighten both power cord
storage arms (8) with a Phillips head screw driver (not
included).
3.7

INSTALL THE UPPER HANDLE

1. Push and hold the handle lock button (15) on the upper
handle (14).
2. Move the upper handle (14) into the lower handle (17)
until the handle lock button (15) clicks through the slot
(16).
8
14
15
16
17
English
3.8

INSTALL THE WHEELS

19
1. Put an axle (19) through the wheel and handle frame.
2. Attach a washer (20) to the axle (19).
3. Put a cotter pin (21) through the hole of the axle (19).
3.9

INSTALL THE SPRAY WAND

4
1. Push the end of the spray wand (4) into the gun handle
(1).
2. Turn the spray wand (4) clockwise until the tabs lock into
position.
Make sure that the connection has no leakage.
3.10 INSTALL THE HIGH PRESSURE
HOSE
23
1. Push and turn clockwise one end of the high pressure
hose (9) into the inlet coupler (22).
8
20 21
1
WARNING
22
9