Standard Accessories; Applications - HIKOKI CG 25SC Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
English
16. If you drop or bump the tool, inspect it carefully to check
there is no damage, cracks or deformation.
Using a tool that is damaged, cracked or deformed could
result in injury.
17. Secure the tool during vehicle transport to ensure that it
lies still.
Failure to heed this warning may result in an accident.
CAUTION
1. Do not turn on the nylon head for cutting objects other
than grass. Do not operate the tool in water puddles and
make sure that soil does not come into contact with the
nylon head.
2. The tool contains precision parts and should not be
dropped, exposed to strong impact or water.
The tool could be damaged or malfunction.
3. When the tool is to be stored after use or be transported,
remove the nylon head.
4. Do not expose the tool to insecticide and other
chemicals.
Such chemicals could cause cracking and other
damage.
5. Replace warning labels with new labels when they
become diffi cult to recognize or illegible and when they
start to peel.
Ask your dealer to provide the warning labels.
6. EXTENSION CORDS
You should only use extension cords for outdoor use,
PVC ordinary duty with a cross sectional area not less
than 0.75mm
.
2
Before using, check the supply and extension cords
for signs of damaged during use, disconnect the cord
for signs of damage or aging. If the cord becomes
damaged during use, disconnect the cord from the
supply immediately. DO NOT TOUCH THE CORD
BEFORE DISCONNECTING THE SUPPLY. Do not
use the appliance if the cord is damaged or worn. Keep
extension cord away from cutting elements.
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
CG25SC / CG30SC : Grass Trimmer
Be sure to read and fully understand this
instruction manual before operating this tool.
Please note that improper use of this tool may
result in accidents.
Do not use this tool in the rain or in damp or wet
locations.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2002/96/
EC on waste electrical and electronic equipment
and its implementation in accordance with
national law, electric tools that have reached
the end of their life must be collected separately
and returned to an environmentally compatible
recycling facility.
If the power cord is damaged or cut, immediately
unplug it from the electrical outlet.
Always wear hearing protection.
Always wear eye protection
Always make sure there is no one in the
surrounding area before operating this tool.
Keep others away during operation.
V
Rated voltage
P
Power Input
n
No-Lode speed
0
Switching ON
Switching OFF
Disconnect mains plug from electrical outlet
Prohibited action
Warning
Class II tool

STANDARD ACCESSORIES

In addition to the main unit (1 unit), the package
contains the accessories listed in the below.
○ Cover (with D4 screw) ................................................. 1
○ Sub Handle (with Sleeve and Knob Bolt) .................... 1
○ Protective glass........................................................... 1
○ Shoulder belt ............................................................... 1
○ Nylon line (spare) ........................................................ 1
Standard accessories are subject to change without notice.

APPLICATIONS

○ Trimming, scaling and mowing of weed.
○ Lawn edging
SPECIFICATIONS
Model
Voltage (by areas)
Power Input
No-load speed
Cutting capacity diameter
Weight (Only main body)
NOTE
Due to HiKOKI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
4
CG25SC
CG30SC
230 V
230 V
400 W
450 W
11000 min
9000 min
-1
250 mm
300 mm
2.3 kg
2.6 kg
-1

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cg 30sc

Table des Matières