Publicité
Les langues disponibles
Les langues disponibles
3. Product details (see page 2-3)
A
B
C
D
E
F
4. Initial use
Check that the product and the components are intact and that the device is work-
ing properly when using it for the first time. Remove the kettle, the base station
and all the accessories out of the packaging and connect the base to a properly
installed and earthed 230V AC socket.
Wipe the surface of the kettle using a slightly dampened cloth. To remove any
manufacturing residues, fill the water container once with cold water up to the
maximum mark before using it for the first time. Boil the water by pressing the
"Power" button on the base station once. Discard the water after the initial boiling.
Repeat this procedure two to three times.
This appliance is intended for domestic use and other similar applications like: in
the staff kitchen in shops, offices and other business areas, in agricultural prop-
erties, by customers in hotels, motels and other residential facilities as well as in
B&Bs.
Caution! Please remember that the boiling process may be interrupted briefly
below 100°C by intermediate measurements. Please wait until the boiling is com-
pleted, which is confirmed by the beep. The heating element switches off auto-
matically and the boiling process is stopped. The appliance can now be lifted and
the water can be used.
5. Usage with standard lid for water boiling function (1)
Press the Lid-opener. You can now remove the lid (E) using the opener. Fill the
kettle (A) with cold water, place the lid (E) and press the opener down until it clicks.
Note: A scale is provided on the outside. Do not fill the container above the maxi-
mum mark. The boiling water may spurt out if the kettle is overfilled.
English
Kettle
Tea strainer lid
Tea filter for Turkish tea
Teapot
Standard lid
Base station
21
Publicité
