MOVEMENT OF THE STOPWATCH 1/20-SECOND HAND
• After the stopwatch is started, the STOPWATCH 1/20-second hand moves for about 10
minutes and automatically stops at the "0" position.
•
When the measurement is stopped or split time is measured, it moves to indicate the
elapsed 1/20 seconds.
•
After the stopwatch is restarted or split time is released, the STOPWATCH 1/20-second
hand moves for about 10 minutes and stops automatically.
• In the same manner, if the stopwatch is stopped and restarted repeatedly or split time is
measured and released repeatedly, the STOPWATCH 1/20-second hand moves for about
10 minutes and stops automatically.
•
BEFORE USING THE STOPWATCH, BE SURE TO CHECK THAT THE CROWN IS SET AT THE
NORMAL POSITION AND THAT THE STOPWATCH HANDS ARE RESET TO THE "0" POSITION.
* If the STOPWATCH hands do not return to the "0" position when the stopwatch is reset
to "0", follow the procedure in "Setting the time and adjusting the stopwatch hand position".
ILMYM92
30
ILMYM92
SPLIT TIME MEASUREMENT
A
B
START
SPLIT
RELEASE
MEASUREMENT OF TWO COMPETITORS
A
B
FINISH TIME
START
OF 1ST
COMPETITOR
COMPETITOR
FINISHES
B
A
B
SPLIT
STOP
RESET
B
B
B
2ND
FINISH TIME
RESET
OF 1ST
COMPETITOR
31