Description Of The Symbols - Ayce PRT2643B1 Traduction De La Notice Originale

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

evaluation of the hazard and risk.
Wear hearing protection
Vibration total values (triax vector sum) determined according to ISO 11806-1:2011:
The vibration emission level given in this information sheet has been measured
-
in accordance with a standardized test given in ISO 11806-1:2011.and may be
used to compare one tool with another.
-
It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the
-
tool. However if the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period. An
estimation of the level of exposure to vibration should also take into account the
times when the tool is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator from the effects of
vibration such as:
a)
maintain the tool and the accessories,
b)
keep the hands warm,
c)
organization of work patterns.

DESCRIPTION OF THE SYMBOLS

The use of symbols in this manual is intended to draw your attention to possible risks.
The safety symbols and the explanations that accompany them must be perfectly
understood. The warnings in themselves do not remove the risks and cannot replace
correct actions for preventing accidents.
Read the instruction handbook and follow all warning and safety
instructions.
Before any use, refer to the corresponding paragraph in the present
manual.
Complies with European regulations applicable to this product.
Remove the ignition cable before all maintenance work, and read
the instructions for use.
Take care of the proportion when handling fuel and lubricants.
Don't expose to rain.
The exhaust and exhaust gases are hot.
Beware of thrown objects.
Start engine creates sparking.
Sparking can ignite nearby flammable gases.
Engines give off carbon monoxide, an odorless, colorless, poison gas.
Breathing carbon monoxide can cause nausea, fainting or death.
For outdoor use only
Strictly no naked flames or smoking near the appliance.
The distance between the machine and bystanders shall be at
least 15 m.
Wear eye and hearing protection.
Wear head protection, where there is a risk of falling objects.
Wear gloves when using the product.
Wear slip-resistant footwear when using the device.
Push the bubble 7 times before use to make sure the petroleum
spirit full of the oil way.
Choke closed.
Choke open.
Make sure the cutting head isn't at startup and during work in
contact with foreign objects.
Work only with trimmer head! Never use metal or saw discs.
Danger of injure.
90 91
GB

Publicité

Table des Matières
loading

Table des Matières