Husqvarna PP 70 Manuel D'utilisation page 3

11. Water connector inlet
12. Operator's manual
Owner responsibility
WARNING: Processing of concrete and
stone by methods such as cutting, grinding
or drilling, especially during dry operation,
generates dust that comes from the material
being processed, which frequently contains
silica. Silica is a basic component of sand,
quartz, brick clay, granite and numerous
other minerals and rocks. Exposure to
excessive amount of such dust can cause:
Respiratory disease (affecting your ability to
breathe), including chronic bronchitis,
silicosis and pulmonary fibrosis from
exposure to silica. These diseases may be
fatal;
Skin irritation and rash.
Cancer according to NTP* and IARC* */
National Toxicology Program, International
Agency for Research on Cancer.
Take precautionary steps:
Avoid inhalation of and skin contact with
dust, mist and fumes.
Wear and ensure that all bystanders wear
appropriate respiratory protection such as
dust masks designed to filter out
microscopic particles. (See OSHA 29 CFR
Part 1926.1153)
To minimize dust emissions, use water to
bind the dust, when feasible. If dry operation
is necessary, use an appropriate dust
extractor.
It is the owner's/employer's responsibility that the
operator has sufficient knowledge about how to use the
product safely. Supervisors and operators must have
read and understood the Operator's Manual. They must
be aware of:
• The product's safety instructions.
• The product's range of applications and limitations.
• How the product is to be used and maintained.
National/Local regulations could restrict the use of this
product. Find out what regulations are applicable where
you work before you start using the product.
Product description
The product is a power pack, that is used together with
Husqvarna electrical power tools. For more information,
refer to the operator's manual for the power tool.
This product has embedded connectivity. Refer to
Embedded connectivity on page 3 .
1244 - 002 -
Embedded connectivity
Husqvarna Fleet Services
management solution that gives the fleet manager an
overview of all products that are connected via either
embedded or aftermarket sensors. The sensors record
data like runtime, service intervals, location, and more.
For more information about Husqvarna Fleet Services
download the iOS or Android app Husqvarna Fleet
Services at https://apps.apple.com/se/app/husqvarna-
fleet-services/id1334672726 or https://play.google.com/
store/apps/details?id=com.husqvarna.hfsmobile&hl=en.
Products with embedded connectivity are connected via
the embedded Husqvarna Fleet Services
have Bluetooth Low Energy (BLE). For more information
regarding how to use it, refer to
connectivity on page 8 . For information of the BLE
technology radio spectrum, refer to
connectivity on page 14 . For compliance reservations
regarding Husqvarna Fleet Services
Compliance reservations on page 3 .
Compliance reservations
Note: Changes or modifications made to this equipment
not expressly approved by may void the FCC
authorization to operate this equipment.
Note: This device complies with Part 15 of the FCC
Rules and with Industry Canada licence-exempt RSS
standard(s).
Operation is subject to the following two conditions:
• this device may not cause harmful interference
• this device must accept any interference received,
including interference that may cause undesired
operation
Intended use
This product is used to operate applicable Husqvarna
electrical power tools with a high frequency motor, for
example power cutters and drills. All other use is
incorrect.
The product is kept cool with water. Always use the
product with water.
The product is for professional operation only.
Symbols on the product
WARNING: Not careful or incorrect use can
result in injury or death to the operator or
others.
Read the manual carefully and make sure
that you understand the instructions before
you use the product.
™
is a cloud asset
™
sensor that
To use embedded
Embedded
™
, refer to
™
,
3