Troubleshooting; Checkpoints - Samsung WA54R7200A Serie Manuel D'installation

Troubleshooting

Checkpoints

If you encounter a problem with the washer, first check the table below and try the
suggestions.
Problem
Does not turn on.
Does not start.
Untitled-12 51 Untitled-12 51
• Make sure your home electrical system is providing
electrical power that matches the requirements of the
washer. See page 16.
• Make sure the power cord is completely plugged in.
• Check the fuse or reset the circuit breaker.
• If you have turned the power off to drain the water added
by the Active Waterjet function, power does not turn on
until the water is completely drained.
• Make sure the door is closed.
• Make sure the water taps are open.
• Make sure to press or tap Start/Pause (Hold to Start) to
start the washing machine.
• Make sure Child Lock is not activated.
• Before the washing machine starts to fill, it will make a
series of clicking noises to check the door lock, and then
does a quick drain.
• Was the door opened during the spinning cycle? Close the
door, and then press or tap Start/Pause (Hold to Start) to
resume.
• The machine has entered Standby, has paused, or is in a
soaking cycle. Please wait.
• Check the fuse or reset the circuit breaker.
Action
English 51
2020-09-04 2020-09-04 7:51:22 7:51:22