Switch On Inverter; Protection Mechanism; Se200 Protection Mechanism; Se350 Protection Mechanism - Cotek SE Serie Manuel D'utilisation

EN
If the total power consumption over the rated power of the inverter,
remove the non-critical: loads until the total power consumption is
below the rated power.

4-4. Switch ON Inverter

Set the power switch to the "ON" position. The inverter will carry
out self-diagnosis and, the LED's will also appear various colors.
Set the power switch to the "OFF" position. The inverter stops and
all the lights that are on will go off.

4-5. Protection Mechanism

4-5-1. SE200 Protection Mechanism

Model
12V
24V
Model
12V
24V

4-5-2. SE350 protection mechanism

Model
12V 15.5V ± 0.25V
24V
48V
Model
12V
24V
48V
22
Over Voltage (DC)
Shutdown Restart
16V ± 3% 14.5V± 3%
32V ± 3% 29V ± 3%
Table 20. SE200 DC input protection mechanism
Over Temperature Protection
Shutdown
90 ± 3℃
Table 21. SE200 over temperature protection mechanism
Over Voltage (DC)
Shutdown Restart
14.5V± 0.25V
31V ± 0.5V 29V ± 0.5V
62 ± 1V 58V ± 1V
Table 22. SE350 DC input protection mechanism
Over Temperature Protection
Shutdown
83 ± 5℃
Table 23. SE350 over temperature protection mechanism
Under Voltage
Alarm Shutdown
10.5V ± 3% 10.0V ± 3%
21V± 3% 20V ± 3%
Restart
50 ± 3℃
Under Voltage
Alarm
Shutdown
10.5V ± 0.25V 10V ± 0.25V
21V± 0.5V 20V ± 0.5V
42V± 1V 40V ± 1V
Restart
53 ± 5℃
Under Voltage
Restart
12.5V ± 3%
25V ± 3%
Under Voltage
Restart
12V± 0.25V
24V ± 0.5V
48 ± 1V