Remote Port (Rj-11) - Cotek SE Serie Manuel D'utilisation

EN
Mode 1
Mode 2
Mode 3
Mode 4
3-2-3. Remote Port (RJ-11) 
The SE400 inverter can be compatible with CR-8 remote control.
Before using the remote control, make sure the main switch on
inverter must be at " REMOTE" position.
Pin Number
1
2
3
4
5
6
18
Table 18. SE series wiring for control
Signal Description
Reserved
The same polarity as the battery negative
GND
side
─
─
RMT Remote controller panel (positive)
─
Table 19. SE series green terminal signal description
─
─
─
─