Know Your Switchplate - Clarke EX20 Serie Mode D'emploi

ENGLISH

KNOW YOUR SWITCHPLATE

A Circuit Indicator (green) - When this light is on, it indicates that the two cords are plugged into separate circuits (only used on 100H
model). NOTE: if this indicator light is not turned on, you may have both power cords on the same circuit and this can trip the circuit breaker
in the wall.
B Vacuum Switch - This switch turns the vacuum motor ON and OFF.
C Pump Switch – This switch turns the pump ON and OFF.
D Heat Switch - The heat switch turns the heater ON and OFF (not used on 100 model 56105288).
E Pressure - This label identifi es the maximum pressure of your machine.
CAUTION!
The circuit breaker in the wall panel can trip if both cords are on the same circuit.
A
A - 8
INSTRUCTIONS FOR USE
B C
EX20 - 56091193
E D
REVISED DATE
4/2015