Cleaning And Maintenance; Replacing Lamps - Beko CFB 6310 W Manuel De L'utilisateur

3

Cleaning and maintenance

3.1 Cleaning
The cooker hood should be cleaned regularly (at
least with the same frequency with which you
carry out maintenance of the fat filters) internal-
ly and externally. Clean using the cloth dampened
with neutral liquid detergent. Do not use abrasive
products. DO NOT USE ALCOHOL!
Failure to carry out the basic clean-
A
ing recommendations of the cooker
hood and replacement of the filters
may cause fire risks.
Therefore, we recommend observing these in-
structions.
The manufacturer declines all responsibility for
any damage to the motor or any fire damage linked
to inappropriate maintenance or failure to observe
the above safety recommendations.
3.1.2 Grease filter - Carbon filter
(*)
It is/they are mounted on the back of the grill and
must be changed once a month.
If the metal fats filter is envisaged in the model
in your possession, this must be cleaned once a
month with nonaggressive detergent manually
or in a dishwasher at low temperature and short
cycle.
The metal anti-fats filter might discolor by wash-
ing in a dishwasher but its filtering characteristics
do not change at all.
3.2 Maintenance
ATTENTION! Before performing any maintenance
operation, isolate the hood from the electrical
supply by switching off at the connector and re-
moving the connector fuse. Or if the appliance has
been connected through a plug and socket, then
the plug must be removed from the socket.
Hood / User Manual

3.3 Replacing lamps

Disconnect the hood from the electricity.
A
Prior to touching the light bulbs en-
sure they are cooled down.
Replace the damaged lamp.
Use E14 3W max LED lamps only. For more details,
check enclosed leaflet "ILCOS D" (alfanumeric po-
sition "1d").
If you need to transport the appliance:
• Keep the original packaging of the appliance.
Transport the appliance with its original pac-
kage, and follow the transport markings on the
original package.
If you do not have the original package:
• Do not place any objects on the hood.
• Protect the outer surface from impacts.
• Pack the appliance so that it would not be dama-
ged during transport.
9 / EN