Cleaning And Maintenance - Beko CFB 9433 X Mode D'emploi

4

Cleaning and maintenance

Prior to cleaning and maintenance, unplug the
appliance or turn the main swich off or loosen the
fuse that supplies the hood.
Failure to comply with the provi-
sions relating to cleaning of the
device and replacement of filters
A
may cause fire risks. It is therefore
recommended to comply with the
guidelines given herein. The manu-
facturer is not liable for any dama-
ge to the engine or fires caused by
improper use.
Clean using only a cloth dampened with neutral
liquid detergent. Do not clean with tools or ins-
truments. Do not use abrasive products. Do not
use alcohol
4.1 Cleaning of grease filter
This filter captures particles in the air. You are re-
commended to clean your filter every month under
normal usage conditions. First remove the grease
filters for this process. Wash the filters with liquid
detergent and rinse them with water and install
them back after they get dry. Grease filters may
get discolered as they are washed; this is normal
and you don't need to change your filter.
10 / EN
C
You can wash the grease filter in
the dishwasher
4.2 Changing of carbon filter (Air
circulation mode)
The hood can be fitted with an active carbon filter.
The carbon filter is applied only in case the hood is
not connected to the vent duct.
In any case it is necessary to replace the carbon
filter at least every three months.
WARNING:
A
• The carbon filter is never washed.
• Carbon filter is available from
Authorized Services.
Hood / User Manual